The Connection Onboarding Wizard is a short setup guide that appears the first time you open a new project. It takes you through two things:
- Connecting your data integration, so the platform can receive your connection data.
- Reviewing your program's verification rule, so you know how your connections will be checked.
The wizard only appears for new projects in programs that use remote verification.
How to complete the wizard
Open your new project. The wizard starts automatically the first time you open it.
- Connect your data integration. Choose your integration type, enter its details, then confirm. If your program allows it, you can click Skip and set up your integration later from the Connections page.
- Review the verification rule. The wizard shows the rule used to verify your connections in this program. Read it carefully, as it affects when you can submit claims. If terms and conditions are shown, read and accept them to continue.
- Finish the wizard. You'll be taken to your project's Connections page, where you can track the status of each connection.
The wizard only appears once. After that, your project opens straight to the Connections page.
Verification and submitting claims
Each program decides whether your connections must be verified before you can submit a claim. You'll find this in your project.
Note: To avoid delays, check your connection statuses on the
Connections page before you start your claim. For more on submitting, see
Submit Your Claim(s).
FAQs
I skipped the integration step. How do I connect it later?
Go to your project's Connections page and set up your integration from there.
I didn't see the wizard. Is something wrong?
No. The wizard only appears for new projects in programs that use remote verification. Existing projects go straight to the Connections page.
Why can't I submit my claim?
Your program may require verified connections before you submit. Check the Connections page and make sure your connections show as Verified.
Where can I see my program's verification rule again?
It's shown in the banner at the top of your project's Connections page.
I still need help.